View source for PCB Repair Logs Fighting Soccer Bootleg

==Fighting Soccer (Bootleg)==
<p><table class="infobox vevent" style="width:22em;" cellspacing="5">
<caption class="summary" style=""><b>Fighting Soccer (Bootleg)</b></caption>
<tr class=">
<td colspan="2" class="" style="text-align:center;">[[Image:marquee_fighting_soccer.jpg|200px]]</td>
</tr>
<tr class="">
<th scope="row" style="text-align:left; white-space: nowrap;">PCB Image</th>
<td class="" style="">Reserved</td>
</tr>
<tr class="">
<th scope="row" style="text-align:left; white-space: nowrap;">Pin Out</th>
<td class="" style="">Reserved</td>
</tr>

</table></p>
'''Repairer:''' [http://www.aussiearcade.com.au/member.php/8767-Elgen Elgen]<br>
'''Forum Thread:''' [http://www.aussiearcade.com.au/showthread.php/46228-SNK-Fighting-Soccer-Bootleg-Repair-Log Fighting Soccer (Bootleg) PCB Repair]<br>
<br>
Now this board is a relatively new investment (from the same batch as M.I.A. http://elgensrepairs.blogspot.com/20...a-rep-log.html). A bootleg of SNK's Fighting Soccer. Before even connecting it, I could see that it have seen better days.

Here a broken cappy...
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 1.jpg]]
<br>
<br>
And had someone tried to drill holes in the PCB???
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 2.jpg]]
<br>
<br>

...not only two but THREE PLACES...WTF?!
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 3.jpg]]
<br>
<br>
Without getting my hopes up too high, I replaced the broken cap and hooked the poor thing up in the bench. Well first thing I noticed: No sound! But when I turned the volume pot on the board up, I did hear a hissing sound (It Still Alive };-)). Hmmm, a fast check with the voltmeter and it was obvious that this board didn't get -5V. Soon I found out why?! My JAMMA-extender didn't have -5V wired (note to self: Why do you keep buying premade stuff, that you could have done better yourself? Grrrr). Tried to hook up the board directly in the benches JAMMA-slot...
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 4.jpg]]
<br>
<br>
...and heard the well known SNK-boot-jingle from the speakers };-D
Wired the -5V on the extender and hooked the board up again.
A lot of the sprites had horizontal stripes through them.
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 5.jpg]]
<br>
<br>
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 6.jpg]]
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 7.jpg]]
<br>
<br>
By shortening adjacent pins on different RAMs and ROMs I quickly saw, that the graphics was (as with most boards with 2 PCBs) handled by the secondary PCB. So tested all data and address pins on the RAMs and ROMs with the scope, but found no oddyties.
Now, it way getting late and I felt a bit tired. I did however decide to do a little piggy-backing of TTLs before going to bed. The board have a cluster of 3 245's in the middle and I just happen to have a tube of them on the table, so I thougth: Let's give it a try:
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 8.jpg]]
<br>
<br>

...and to my big surprise, all sprites looked normal again. Quite a lucky punch (I so i thougth!).
I quickly desoldered the IC and put it in my Top2005+ for testing...hmm, the test came out successful??? The one I've used for piggy-back (the one from tube) also passed the test.
Fitted a socket and inserted the new one: Stripes through sprites!
Inserted the old one back into the socket: Stripes through sprites!!
Piggy-backed the new one on top of the old one: Still stripes through sprites!!!
(BTW: Did you notice that the words "sprites" and "stripes" have the exact same letters...kind'o'funny };-P).
Now I was really puzzled...Then tried piggy-backing the new on top of the 2nd 245 in the batch of 3: No stripes??? WTF!
I wanted to get to the bottom of this, so desoldered the 2 others as well and fitted sockets.
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 9.jpg]]
<br>
<br>

Slammed in 3 new ones from the tube: Stripes!
Put the old ones back: Stripes! (MOAN!)
I discovered that one of the 245's wasn't inserted fully into the socket. With the board still running I gave it a push, and the stripes went away?! Released the pressure and stripes came back. Began pressing on IC's in the surrounding area: Same thing happend!!!
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 10.jpg]]
<br>
<br>

Picked up the board and bended it slightly with the same result.
Now we are getting somewhere; this smelled an awful lot like a short-circuit of some sort.
When looking closely at the joints on the solderside, there was alot of them looking very nasty:
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 11.jpg]]
<br>
<br>

This is just 2 examples, but this board has extremely many of them.
So started a shotgun-scheme, where I did a reflow on the nasty joints I could see checking the board every time. After about 10 of them with no luck, I decided to change strategy into a more systematic brute-force approach.
Started by cleaning the lower half of the board using rubbing alcohol and a toothbrush.
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 12.jpg]]
<br>
<br>

Then starting at ground-zero (the place where I had to apply the least pressure to provoke the fault), I began the process of reflowing the joints on every IC while working my way to the edges of the board. After having done an IC, I tested the board. And on the 18th IC I hit the jackpot!
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 13.jpg]]
<br>
<br>

It was this PROM who was the little troublemaker };-)
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 14.jpg]]
<br>
<br>

And now all the sprites looked good at all times };-D
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 15.jpg]]
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 16.jpg]]
<br>
<br>

Just before I close this log off, I'd like to share with you all this piece of beautiful hairdresser art };-P
<br>
<br>
[[File:Pcb repair fighting soccer bootleg 17.jpg]]
<br>
<br>

<br>[[PCB_Repair_Index|Back to PCB Repair Index]]